|
BREATHER PLUGS
|
|
|
TCF/Z
Filling plug with breather.
Threaded plug with knurled round
head for hand-tightening. Hole for venting internal pressure.
For application only on upper part of the crankcase away from
moving parts. For applications requiring extra-tight sealing,
type TSFT/N is recommended.
Available with gas thread from 1/8" to 2" and metric
thread from 10x1 to 33x2.
|
|
|
TCF
Filling plug with breather.
Hole for venting internal pressure.
For application only on upper part of the crankcase away from
moving parts. For applications requiring extra-tight sealing,
type TSFT/N is recommended.
Available with gas thread from 1/8" to 2" and metric
thread from 10x1 to 60x4. |
|
|
TCF/F
Filling plug with breather and milled head.
Hole for venting internal pressure.
The milled head produces a crown with greater adherence area to
the crankcase. For application only on upper part of the crankcase
away from moving parts. For applications requiring extra-tight
sealing, type TSFT/N is recommended.
Available with gas thread from 1/8" to 1" and metric
thread from 10x1 to 22x1,5. |
|
|
TCFS
Filling plug and breather.
Threaded plug with hex head and
with hole and a spherical bronze filter which vent internal pressure
and keep out foreign bodies during the intake stroke. The built-in
filter has a filtration degree of 40 microns. The TCFS is especially
suitable in dusty environments and with very small encumbrance.
Available with gas thread from 1/4" to 1" and metric
thread from 14x1,5 to 22x1,5.. |
|
|
TCSF/Z
Filling plug and breather.
Threaded plug with knurled round
head for hand-tightening. The hole and a spherical bronze filter
vent internal pressure and keep out foreign bodies during the
intake stroke. The built-in filter has a filtration degree of
40 microns. The TCSF/Z is therefore especially suitable in dusty
environments and is recommended for applications on Hydraulic
Units.
Available with gas thread from 1/4" to 2" and metric
thread from 14x1,5 to 33x2. |
|
|
TMV
Breather plug.
Breather plug with O-ring and external
valve calibrated from 0,10 to 0,15 bar.It opens at intervals and
vents internal pressure. The valve has the double function of
keeping out foreign bodies and holding in the fluid when the machine
is turned upside down for shipping. It is especially recommended
for Differentials, Transmissions and small Speed Reducers.
Available with gas thread from 1/8" to 1" and metric
thread from 10x1 to 22x1,5. |
|
|
TFSO/R
Breather plug.
Oil filling and breather plug with
galvanized-steel cover. Large internal chamber with O-ring especially
designed for Agricultural and Earth- moving Machines, to be applied
wherever there is strong sloshing of the fluids.
Available with gas thread from 1/8" to 1" and metric
thread from 10x1 to 22x1,5. |
|
|
TSF
Oil filling plug with breather.
A galvanized-steel cover and a spherical
bronze filter vent internal pressure and keep out foreign bodies
during the intake stroke. The built-in filter has a filtration
degree of 40 microns. The TSF is therefore especially suitable
in dusty environments and is recommended for applications on Hydraulic
Units and Cylinders.
Available with gas thread from 1/4" to 2" and metric
thread from 14x1,5 to 60x4. |
|
|
TSFA
Oil filling plug and breather.
A galvanized-steel cover and a spherical
bronze filter vent internal pressure and keep out foreign bodies
during the intake stroke. The built-in filter has a filtration
degree of 40 microns. The TSFA is therefore especially suitable
in dusty environments and is recommended for applications in the
motor field.
Available with gas thread from 1/8" to 1" and metric
thread from 10x1 to 30x1,5. |
|
|
TSFT/N
Oil filling plug and breather.
Large chamber with labyrinth and
perpendicular cut protected by a galvanized-steel cover. The pressure
created by moving parts within the gearbox is vented through the
labyrinth without oil spattering, even though the plug is mounted
vertically to the parts. Particularly suitable for mounting on
Reduction Gears, Geared Motors, Speed Variators and Gearshift
Boxes.
Available with gas thread from 1/4" to 2" and metric
thread from 14x1,5 to 60x4. |
|
|
TSS
Breather plug with valve.
Breather plug with galvanized-steel
cover and specially-designed internal valve, calibrated from 0,05
to 0,10 bar, which opens at intervals to vent internal pressure
created by fluid turbulence. Besides keeping out foreign bodies,
it lets overturning during shipment without fluid leaking. It
is especially recommended for applications on Speed-shift Gears,
Agricultural over-Gears and Speed-Reduction Gearboxes.
Available with gas thread from 1/8" to 1" and metric
thread from 10x1 to 33x2. |
|
|
PRS/F
Extension for oil with breather.
Made of aluminium alloy, same thread
for both internal and external side, with large chamber with labyrinth.
Particularly suitable for Agricultural, Earth Moving and Building
Machines.
Available with gas thread from 1/4" to 1" and metric
thread from 14x1,5 to 22x1,5. |
|
|
TSVV
Breather plug with double valve.
Breather plug with double valve
made of hardened and tempered light alloy. It is provided with
standard 0,10 bar calibration, which can be adjusted by the operator
depending on the intended use. The double valve ensures venting
of internal pressure and inlet of air when the flow medium level
decreases thus hindering cavitation on delivery. Particularly
suitable for Tanks, Oil-hydraulic Circuits and Hydraulically Operated
Lifting Machines.
Available with gas thread from 1/4" to 1" and metric
thread from 12x1,5 to 33x2. |
